Connecting To Video Devices; Connecting To Hi-Vision Devices - Panasonic PT-D995U Operating Instructions Manual

Connecting to Various Devices (Cont.)

Connecting to Video Devices

Before connection, be sure to turn off both the projector and video device.
Read the manual which comes with each video device thoroughly.
Use the supplied AV connection cable. An AV connection cable with an S video terminal is not supplied.
To Y/C
To select the proper audio input for video input
The video input terminals (AV IN terminal) can be
switched with the VIDEO button. However, since this
projector has only a single audio input terminal,
reconnect audio input in accordance with the AV
device to be used.

Connecting to Hi-Vision Devices

Before connection, be sure to turn off both the projector and Hi-Vision devices.
Read the manual which comes with each Hi-Vision device thoroughly.
Use separately available BNC cables and audio cables to connect Hi-Vision devices.
To select the proper audio input for video input
The video input terminals (AV IN terminal) can be
switched with the VIDEO button. However, since this
projector has only a single audio input terminal,
reconnect audio input in accordance with the AV
device to be used.
22
S video cable
BNC-RCA conversion plug (Supplied)
To VIDEO
To AUDIO (L)
AV connection
cable
To AUDIO (R)
(Supplied)
To AUDIO (R)
To AUDIO (L)
Audio cable
To VIDEO
To Y
To P /B-Y
B
To P /R-Y
R
BNC cable
Video devices
VCR (Video Cassette recorder)
Laser video disc player
Camcorder
Use of an extension cable to connect a video device and the
projector could cause video degradation.
When a signal with much jitter is reproduced on a VCR or special-
effect playback is performed, the upper part of the picture or the
picture itself may be erased or distorted.
Hi-Vision devices
W-VHS VCR
Text/video camera
Hi-Vision video camera
Other devices with component signal output terminals (DVD player
(NTSC), etc.) can be connected.
*DVD: Digital Video Disc