Panasonic PT-D995U Operating Instructions Manual page 14

Panasonic projector operating instruction pt-d995u
Table of Contents

Advertisement

Controls and Features (cont.)
Connector Panel (Cont.)
COMPUTER IN (computer input) -2 terminals (BNC)
These are input terminals for analog RGB signals, vertical
sync (V) signals, and horizontal sync (H) signals/composite
signals(Cs). Devices which have analog RGB signal output
terminals can be connected.
*Input of external sync signals is automatically
detected.
Detection of H/D signals or Cs signals causes automatic
switch to external sync. The priority order is H/D > Cs.
When computer-related signals are input, the uppermost
edge of the screen may appear bowing if the sync signal
input is composite sync (Cs) or G on sync signal. In that case,
use separate sync signals for vertical sync (V) and horizontal
sync (H).
AUDIO input terminal (stereo mini jack)
This is an audio input terminal for COMPUTER IN
(computer input) -2 terminal. Connect the audio output
signal of a device connected to COMPUTER IN (computer
input) -2 terminal.
* When input to COMPUTER -2 is selected, the audio signal
input is reproduced by the projector's speakers. Also,
signals can be output from the AUDIO OUT (audio output)
terminal.
(However, if a cable is connected to AUDIO OUT (audio
output) terminal, audio sound does not come out from
the projector's speakers.)
14
COMPUTER IN (computer input) -1 connector (D-sub
3- row 15 pin)
This is an input connector (PC) dedicated for computer
signals (RGB video signals and sync signals).
Connect the display output connector of the computer to
this connector. When a Macintosh computer is to be
connected, use the Conversion adapter for Mac supplied.
When computer-related signals are input, the uppermost
edge of the screen may appear bowing if the sync signal
input is composite sync (Cs) or G on sync signal. In that case,
use separate sync signals for vertical sync (V) and horizontal
sync (H).
AUDIO (audio) input terminal (stereo mini jack)
This is an audio input terminal for COMPUTER IN
(computer input) -1 terminal. Connect the audio output
signal of a device connected to COMPUTER IN (computer
input) -1 terminal.
* When input to COMPUTER -1 is selected, the audio signal
input is reproduced by the projector's speakers. Also,
signals can be output from the AUDIO OUT (audio output)
terminal.
(However, if a cable is connected to AUDIO OUT (audio
output) terminal, audio sound does not come out from
the projector's speakers.)

Advertisement

Table of Contents
loading

Table of Contents