Clock Phase Adjustment - Panasonic PT-D7500U Operating Instructions Manual

Clock phase adjustment

Clock phase adjustment achieves the best image when the screen flickers or halo is observed around the contour.
Procedure of adjustment
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
POSITION
SHIFT
SIZE
BLANKING
CLOCK PHASE
INPUT RESOLUTION
CLAMP POSITION
KEYSTONE
EDGE BLENDING
:MENU SELECT
:ADJUST
Note
• No optimal value may be obtained if the output of the PC to which the signal input is applied is
unstable.
• No optimal value may be obtained if the total number of dots is not correct.
• The clock phase can be adjusted only when RGB signal input is applied with RGB1, RGB2 IN, and the
analog input module (optional: ET-MD95RGB).
DEFAULT
0
Press the "MENU" button.
The MAIN MENU screen will be displayed
Select the "POSITION" with the
buttons.
Press the "ENTER" button.
The POSITION screen will be displayed
Select "CLOCK PHASE" with the
buttons.
Adjust the clock phase with the
buttons.
The value changes from 0 to 31.
61