Table of Contents
Advertisement
SPECIFICATION
Input:
18 MJ/h
Burner: Stainless Bunsen Type
Ignition:
Continuous Spark
Flue:
Gas Inlet: RQ 15 BSP Connection
Gas Control:
Forced Flue (Components are supplied with appliance).
Rinnai Electronic ModulatinQ Controls.
Electrical
Supply:
23OV, 50 Hz. This appliance
is fitted with a supply
lead and 3 pin plug.
Replace
only with Rinnai
part number
3010.
n
Remove parts from carton and check that all parts shown below are included
in the
installation
kit.
Flue Manifold . . . . . . . . . . . . . . . . . . . . . . . . 1
Spare rubber seal
. . . . . . . . . . . . . . . . . . . . . . . .
1
('A' Flue units only)
(For weatherboard installations)
Wall Bracket
Check the unit supplied is correct for the gas type in your area.
Refer to local gas authority for confirmation of gas type if in doubt.
Refer to data plate located inside the front panel.
Check for damage, if the unit is damaged contact your supplier or Rinnai.
Do not install a damaged unit before checking with your supplier.
Refer to an approved pipe sizing chart if in doubt about size of gas line.
-2l-
Hide quick links:
Advertisement
Table of Contents
