Fitting Unit; Air Inlet Hose; Locking Clamp Screw Clamp And Insulation - Rinnai rhfe-431ft Instruction Manual

IR INLET HOSE
Manifold
Inlet hose
Hose clip
Detail of Hose clip
Plastic tie
Inlet hose
.OCKING CLAMP SCREW CLAMP AND
NSULATION.
'he following components can be fitted by
caching down the rear of the appliance as it is
lositioned against the wall.
. Connect the flue outlet to the manifold by
fxtending the stainless steel sliding tube until it
5 fully inserted into the manifold.
Sliding Tuba
=2
f
sliie
Do not extend flua tuba
beyond red
tine.
Manifold
2. Fit the locking clamp over connection
between sliding tube and manifold. Engage the
hook and rotate it until it snaps against the
body of the clamp.
flue outlet
flue outlet
Manifold
3. Fit the screw clamp between the sliding tube
and the flue elbow. Secure with the 4 mm screw
supplied. The flue outlet is now locked into
position.
saew
Locking damp
Flue Outlet tuba
4. Slide the insulation sleeve up to the flue
manifold, slip the securing clip over the sleeve
as shown.
Flue
Fit cffp
A
Stii insulation sock
Slidatohare
-27-