Peak Load Cut-Out; Communication Module; Operating Data - Miele PW 6207 Operating Instructions Manual

Optional modules

Peak load cut-out

If the peak-load cut out function is activated the
heating will switch itself off and any programme
running will be stopped. The following message will
appear in the display:
1 Cottons
Prog. stopped. Peak load cut-out.
Programme will continue
i
Once the peak load has finished the programme will
continue automatically as before.

Communication module

This machine can be linked to a PC via a
communication module.
The shaft for the communication module is located at
the rear of the machine.
An editor programme is available from Miele.

Operating data

By pressing the \ "Operating data" button the
operating data module can be used to read or delete
operating data either before the start of a
programme, or after it has finished.
1 Cottons
2 Cottons
3 Cottons intensive
\
i
After pressing the \ button the following will appear
in the display:
Operating data module
Total data
Programme data
\
Selection choice:
– Total data
In this option all programme data is collated and
summarised.
– Programme data
Programme data contains all the data called up
during a programme.
– Delete data
- Module (Total data including programme data)
22
f
90 °C
60 °C
60 °C
FC A
e
A
- Total data (only delete total data)
- Programme data (only delete programme data)
Pressing the button again deselects the \
"Operating data" option.
If there is no more memory available in the operating
data module a message will appear after pressing
the START button to say that the operating data will
be overwritten.
If you press the A "Back" button or do not press the
START button within 30 seconds the display will
revert to the way it was before starting the
programme.
Total data
Operating data module
Total data
Programme data
\
After selecting Total data the following (example) will
appear in the display:
Operating data module ~ Total data
Total time power on: 200,987 h
Operating hours: 123456 h
\
Other options:
Total time power on: 200,987 h
Operating hours: 123,456 h
Duration heating active: 123,456 h
Duration drive motor active: 93,456 h
Programme starts: 23,456
Programme stops: 567
Programme cancellations: 67
Water volume: 1,234,567 l
Amount of laundry: 1,234,567 kg
Liquid agent: 2,345 l
Energy: 12,345,678 kWh
e
A
e
A