Miele PW 6207 Operating Instructions Manual page 23

Programme data
Operating data module
Programme data
Delete data
\
After selecting Programme data the following
(example) will appear in the display:
Operating data module~ Programme data
1 Cottons
2 Cottons
\
Select the programme you want from the list and
press the rotary dial to call up a list of all programme
starts including date and start time for that
programme.
Programme data ~ 1 Cottons
Date: 21.05.2010 Start time: 11:30
Date: 21.05.2010 Start time: 12:30
\
Select the required programme start from the list for
programme 1 Cottons and confirm your choice by
pressing the rotary dial.
Programme data ~ 1 Cottons
Date: 21.05.2010
Name: Smith
\
Other options:
Town: Abingdon
Serial number: 12345678
Machine type: PW 6107
Amount of laundry: 13 kg
+ Button: Activated
Starch stop button: Activated
Without spin button: Not activated
Programme start: 11:30
Programme finished: 12:05
Total operating time: 0 h 35 min
Electrical energy: 12.5 kWh
Gas energy: 0 kWh
Steam energy: 0 kWh
Total volume of water: 140 l
Max. water temperature: 95 °C
Max. drain temperature: 45 °C
Programme change: 2
(after making your selection and
pressing the rotary dial only the last 3 stops and starts will
be displayed.)
Programme fault: None
Area 1: Pre-wash
(after making your selection and
pressing the rotary dial you can display the area or the
block.)
Operating time: 6 min
90 °C
60 °C
(only the last 3 faults are saved.)
Water volume: 20 l
Dispensing phase 1: Amount ml
-
selection and pressing the rotary dial 6 dispensings are
displayed.)
Max. temperature: 12 °C
e
Holding time: 6 min
A
Dispensing phase 2: No
Delete data
Operating data module
Programme data
Delete data
e
A
After selecting Delete data the following message will
appear in the display:
Operating data module~ Delete data
Module: 21.02.2010
Total data: 12.07.2010
e
The module menu option can be used to delete the
A
total data and programme data from the operating
data memory.
The total data option can only be used to delete the
total data from the operating data.
The programme data option can only be used to
delete programme data from the operating data.
After making your selection and pressing the rotary
dial you will be prompted to enter your password.
e
Password: _ _ _ _
A
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789
After keying in your password or inserting your
supervisor level key card in the reader the following
security prompt will appear in the display:
Delete operating data?
After pressing the S button the data will be deleted!
Optional modules
(after making your
\
\
K
e
A
e
A
A
S
A
S
23