Detergent Dispensing; Select A Programme - Miele PW 6207 Operating Instructions Manual

Hide thumbs Also See for PW 6207:
Table of Contents

Advertisement

Detergent dispensing

It is important to avoid adding too much detergent as
this causes excessive foam.
– Do not use detergents which create a lot of foam.
– Follow the detergent manufacturer's instructions for
use.
The right amount to dispense will depend on the
following:
– The amount of laundry
– The water hardness level
– The soiling level of the laundry
The amount to dispense
Take the water hardness into account and follow the
detergent manufacturer's instructions on the
packaging.
Water hardness levels
Hardness
Water
range
properties
I
soft
II
medium
III
hard
IV
very hard
Check with your local water supplier if you do not
know the hardness level in your area.
Gas heated machines
On gas heated machines the suds solution is
pumped around the heater elements. This additional
agitation of the suds solution creates foam. It is
therefore important to use a low-foaming detergent
and not to use too much detergent.
If over-foaming occurs use a reduced foam detergent
or call in a detergent application specialist.
Hardness
German
level in
scale
mmol/l
°d
0 - 1.3
0 - 7
1.3 - 2.5
7 - 14
2.5 - 3.8
14 - 21
above 3.8
above 21
How to wash correctly

Select a programme

^ Turn the rotary dial to select a programme (e.g.
Programme 1 Cottons).
For this example, the following will appear in the
display:
16
Separate drain
1
Cottons
2
Cottons
ä
i
Select the Pre-wash, Starch stop or Without spin
additional option
^ Confirm the selection of the programme by
pressing the rotary selector.
For this example, the following will appear in the
display:
1
Cottons
90 °C
Main wash
Rinses
m
k
+i
^ If wished you can now select the Pre-wash
programme block, by pressing the +i function
button.
When the +i function button is pressed, the
following will appear in the display:
1
Cottons
40 °C Pre-wash
90 °C
Main wash
m
k
+i
"+i" is highlighted.
Press the function button again to deselect the
function.
Press the m Starch stop button if the laundry is to
be starched.
Press the k Without spin button if you do not want
the laundry to be spun after being rinsed.
If you do not wish to make any further alterations to
the programme:
^ Press the START button. The programme will start.
90 °C
60 °C
FC
A
10.0 / 10.0 kg
1100 rpm
A
m
10.0 / 10.0 kg
1100 rpm
A
m
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pw 6167Pw 6137Pw 6107

Table of Contents