Download Print this page
ETC Net3 Setup Manual
ETC Net3 Setup Manual

ETC Net3 Setup Manual

Remote video interface
Hide thumbs Also See for Net3:

Advertisement

Quick Links

E T C
S e t u p G u i d e
®
Net3 Remote Video Interface
This guide outlines the setup and configuration of your Net3™ Remote Video Interface (RVI). The RVI
functions as a remote user interface to access and modify the contents of an entire Eos
®
Cobalt
Family show file. You may configure the RVI to run either the Eos or Cobalt software in "Client"
or "Offline" mode. When configured with Eos software, the RVI can also run in mirror mode.
This guide outlines the setup and simple configuration of your Remote Video Interface (RVI) for use
with the Eos Family and Cobalt Family controls systems. For information on using the Eos or Cobalt
client software installed on your RVI, please refer to the associated console operations manual that
shipped with your console, or you may download it from our website at www.etcconnect.com.
Net3 RVI ships with the following:
• Remote Video Interface
• USB Keyboard
• USB Mouse
• Rack Mount Hardware Kit
• IEC Power cords with varying connectors
• Label Sets
• This Setup Guide
• Current Release Note Documentation for Eos Family and Cobalt Family consoles
S e t u p
Connect Cables
Hard Power Switch
100-240VAC
50/60 Hz
2A@120VAC
IEC Receptacle
Step 1:
Corporate Headquarters
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy
Holzkirchen, DE
Hong Kong
Rm 1801, 18/F, Tower I Phase 1 Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
Service: (Americas)
Web:
www.etcconnect.com
4250M2210
Rev C
N et 3 R em o t e V id eo I nt e rf a c e S et up G ui de
USB
Ports
USB
eSATA
Display
Ports
Port
Port
Attach the appropriate IEC power cord to the power connector, then to the IEC receptacle.
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
Tel +39 (06) 32 111 683
Ohmstrasse 3, 83607 Holzkirchen, Germany
service@etcconnect.com
(UK)
service@etceurope.com
Copyright © 2014 ETC. All Rights Reserved.
QSF 4.1.9.1
Released 2014-06
ETC intends this document to be provided in its entirety.
Ethernet Ports 1 & 2
/DVI-I
/DVI-D
DVI-I
DVI-D
USB
Port
Port
Ports
Tel +44 (0)20 8896 1000
Fax +44 (0) 20 8752 8486
Tel +49 (80 24) 47 00-0
Fax +49 (80 24) 47 00-3 00
(DE)
techserv-hoki@etcetcconnect.com.com
Product information and specifications subject to change.
Pag e 1 of 4
®
Family or
Audio Ports
(Not Currently Enabled)
NET3 RVI
AC Input
100-240VAC
50/60Hz 2A
Electronic Theatre Controls, Inc.
C
US
Middleton, WI Made in USA
Tel +608 831 4116
Fax +608 836 1736
Fax +44 (0)20 8896 2000
Tel +852 2799 1220
Fax +852 2799 9325
(Asia)
service@etcasia.com
El ec t r on ic T he at r e C on t ro ls , I nc .

Advertisement

loading

Summary of Contents for ETC Net3

  • Page 1 S e t u p G u i d e ® Net3 Remote Video Interface This guide outlines the setup and configuration of your Net3™ Remote Video Interface (RVI). The RVI ® functions as a remote user interface to access and modify the contents of an entire Eos Family or ®...
  • Page 2 E T C S e t u p G u i d e Net3 Remote Video Interface Step 2: Connect any monitors to the proper ports on the back of the RVI. Net3 RVI supports up to 2 monitors using the following combinations: Signal Type...
  • Page 3 E T C S e t u p G u i d e Net3 Remote Video Interface S t a r t U p At initial startup, the RVI will display the Eos and the Cobalt logos. Use the mouse to select the Eos Family or Cobalt Family as per the connected system.
  • Page 4 E T C S e t u p G u i d e Net3 Remote Video Interface B u t to n C o n fi g u r a ti o n Settings for the RVI can be altered in the Eos Configuration Utility (ECU). The 20 buttons on the front panel of the RVI are configurable from the Buttons section of the ECU.

This manual is also suitable for:

Net3 rvi