Download Print this page

ETC Net3 Setup Manual page 2

Remote video interface
Hide thumbs Also See for Net3:

Advertisement

E T C S e t u p G u i d e
Step 2:
N o t e :
Step 3:
Step 4:
Step 5:
Step 6:
N o t e :
Fron t Panel
Removable
label strip
Live
Tab
Blind
Scroll Lock
Step 1:
Step 2:
Step 3:
Step 4:
N et 3 R em o t e Vi de o I nt e rf a c e S et up G ui de
Connect any monitors to the proper ports on the back of the RVI.
Net3 RVI supports up to 2 monitors using the
following combinations:
Signal
Type
Display Port
DVI
Physical
Port
Yes
Display Port
Yes
with Adapter
DVI-I Port
No
Yes
DVI-D Port
No
Yes
Multitouch monitors need to be Windows 7 or 8 Compatible.
The RVI requires monitors that are at least compatible with Windows 7 and have
a minimum resolution of 1280x1024.
Connect the USB mouse and keyboard to the USB connectors.
Attach a network ethernet cable to the Ethernet port. All communications to the
associated control console are made over this Ethernet connection.
• Connection to the console may be made either directly using a Cat5 or better null-
modem cable or through an Ethernet hub or Ethernet switch using standard Cat5 or
better patch cables.
When all connections are made, switch on the hard power switch
Press the soft power switch, on the front of the unit, to power up the RVI.
If the unit does not power up, check the hard power switch, on the rear panel, to
ensure it is switched on.
20 command
keypad buttons
Escape
Select
M001
M002
M005
M006
Press the soft power switch to activate the RVI (check rear panel to ensure power is
connected and hard power switch is on).
Backlit indicators identify the operating status (master, backup, client, and so on) of the
unit.
USB port is provided for easy show loading to or from a USB storage device.
20 buttons are configurable from the Eos Configuration Utility (ECU). They are set to a
default configuration. The label strips for these buttons are removable and reversible. Any
changes to the button configuration can be written on the opposite side in pencil.
Net3 Remote Video Interface
VGA
Yes
with Active
Adapter
Yes
with Adapter
No
Backlit
indicators
M003
M004
Stop/Back
Primary
Master
M007
M008
GO
Page 2 of 4
Soft Power
Switch
USB
Backup
Sync
Offline
El ec t r on ic T he at r e C on tr o ls , I nc .

Advertisement

loading

This manual is also suitable for:

Net3 rvi