Nettoyage Et Changement Du Sac De Ramassage; Grass Bag Cleaning And Replacement - Honda HRB476C Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

3. Retighten the blade bolts using a torque wrench [5]. Use a wood block to stop the blade

rotating when tightening the bolts.

Blade bolt tightening torque: 5 to 6 kg.m (49 to 59 Nm)

CAUTION:

• If you do not have a torque wrench, ask your approved Honda mower dealer to tighten the

blade bolts for you before you use the mower.

• If the blade bolts are too tight or too slack, they may break or unscrew.

GRASS BAG CLEANING AND REPLACEMENT

BAG CLEANING

CAUTION:

• Washing with a high pressure water or steam jet will damage the bag.

Blocked mesh will prevent the grass from entering the bag.

To clean the bag, we recommend washing it using a water jet directed from the outside to the

inside of the bag. The bag must be completely dry before being used again. If the bag is damp, it

will become clogged very quickly.

WARNING :

Objects struck by the blade may be thrown through a torn or damaged

grass bag. Objects thrown out by the blade can cause serious injuries.

Always replace a torn or damaged grass bag.

3. Resserrer les vis de lame avec une clé dynamométrique [5]. Utiliser un bloc de bois pour

empêcher la lame de tourner lors du resserrage des vis.

Couple de serrage pour les vis de lame : de 5 à 6 kg.m (49 à 59 Nm).

PRÉCAUTION :

• Si vous ne disposez pas de clé dynamométrique, faites resserrer les vis de lame par un

concessionnaire agréé Honda avant d'utiliser la tondeuse.

• Si les vis de lames sont trop ou trop peu serrées, elles peuvent se briser ou se dévisser.