Omron SYSMAC C200H Installation Manual page 169

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
6
7
8
8A
8B
8C
Downloaded from Elcodis.com electronic components distributor
Revision History
Cat. No. W111-E1-10
Date
July 1989 Corrections to pages: 3, 6, 16 to 18, 21, 23, 26, 27, 31, 32, 33, 41, 51, 52, 53, 57,
58, and 60.
February 1990 Entire manual reorganized and reproduced.
October 1990 Revision of text and inclusion of new product information (C200H-CPU11-E, SYS-
MAC NET, SYSMAC LINK, C200H-OC225, and C200H-OD212)
Corrections to pages: 7, 10, 12, 13, 15, 16, 23, 27, 28, 34 to 39, 61, 63, 64, 82,
85, 94, 97 to 100, 103, 104.
May 1991 Pages 33 to 38: Completely redone.
Page 102: Backplane model numbers revised.
Page 103: BC031-V1 and BC101-V1 added to note at bottom of page.
Page 104: Microwave ID Sensor and Analog I/O Units added.
Page 110: Terminal Resistor and Power Supply Adapter model numbers re-
vised.
The manuals has also been reformatted, changing page numbers slightly.
May 1992 Page 7: PC Operation Flowchart redone.
Page 27: The section reference in the second line corrected to Section 2-6
Memory Packs .
Page 28: "Optical Fiber Cable" in the lower left corner corrected to "Optical
Fiber Cable or Wire Cable".
Pages 113 to 128: The following instructions are missing from Appendix E
Programming Instructions : LMSG(47), TERM(48), SYS(49), CMPL(60),
CTW(63), WTC(64), HTS(65), STH(66), VAL(69), SEND(90), and RECV(98).
(These instructions were originally added in revision 8, but inadvertently
omitted from revision 8A.)
December 1993 Multipoint I/O changed to High-density I/O throughout the manual. Scan time
changed to cycle time throughout the manual.
Page 10: Model number corrections made in the first paragraph of CPU .
Page 28: Reference corrected for SYSMAC NET Link Unit and SYSMAC LINK
Unit.
Page 32: Table updated.
Page 33: Note added, 1.4 V corrected to 1.4 A in the top table.
Pages 34, 35: Models added and updated.
Page 37: Calculation of power consumption corrected.
Page 38: I/O Unit Cover description added.
Page 42: Ambient conditions added.
Page 79: "8 A/Unit" in Terminal Connections changed to "16 A/Unit".
Page 82: Max. switching capacity changed.
Page 92: B7A Interface Unit specifications added.
Pages 97 to 105: Appendix C completely updated.
Revision code
Revised content
155