Table of Contents
Advertisement
Priority Channel Scan
A single channel may be programmed as the priority
channel. The radio will constantly monitor this channel
while scanning and when the radio has stopped on an
active channel. If a call is detected on the priority channel,
the radio will automatically move to and remain on the
priority channel for as long as the priority conversation
takes place. Priority channel activity takes precedence
over all other conversations.
NOTE -
Priority channel scan and look-back require that
the radio leave the active channel for a fraction
of a second (at regular intervals) to check the
priority channel for a message. Depending upon
how the radio is programmed (scan speed, etc.),
this may or may not be noticeable as breaks on
the active channel for that same fraction of a
second.
Scan Channel Delete
On occasion you may wish to temporarily delete a channel
from the scan list. To do this, simply press the monitor
button while scanning and stopped on the channel to be
deleted. This will remove that channel from the scan list
until the selector is moved from the scan list channel
position or the radio's power is reset. When power is
restored or the scan list channel position is again selected,
the original dealer programmed scan list will be activated.
13
Advertisement
Table of Contents
