Dvi Edid; Dvi Signal Level; Func1; Osd Position - Panasonic PT-D4000U Operating Instructions Manual

DVI EDID

When the projector and external equipment are
connected by DVI connection but a proper image
cannot be obtained, switch this setting.
EDID1
Select this mainly when external equipment
(DVD player, etc.) that outputs movie video
signals is connected to the DVI terminal.
EDID2:PC
Select this mainly when external equipment
(personal computer, etc.) that outputs still
image video signals is connected to the DVI
terminal.
Mode
480p, 576p, 1080/60i, 1080/50i,
EDID1
720/60p, 720/50p, 1080/60p,
1080/50p
VGA60, SVGA60, XGA50, XGA60,
EDID2:PC
XGA70, XGA75, XGA85, SXGA60
• The optimum setting differs according
Note
to the connected external equipment.
Be sure to check the operating
instructions for the external equipment,
etc.
• Depending on the setting, some
equipment may not provide images or
otherwise operate properly.

DVI SIGNAL LEVEL

When the projector and external equipment are
connected by DVI connection but a proper image
cannot be obtained, switch this setting.
0-255:PC
Select this mainly when connecting external
equipment (personal computer, etc.) using the
DVI terminal output.
16-235
Select this mainly when connecting external
equipment (DVD player, etc.) using the HDMI
terminal output with a conversion cable, etc.
• The optimum setting differs according to
Note
the connected external equipment. Be
sure to check the operating instructions
for the external equipment, etc.
• Depending on the setting, some
equipment may not provide images or
otherwise operate properly.
EDID data

FUNC1

The user can set the function for the remote
control's FUNC1 button.
SYSTEM SELECTOR:
The button functions in the same way as
"SYSTEM SELECTOR" of "PICTURE".
SYSTEM DAYLIGHT VIEW:
This button has the same functions as
"SYSTEM DAYLIGHT VIEW" of "PICTURE".
SUB MEMORY LIST:
This button has the same functions as "SUB
MEMORY LIST" of "OPTION1".

OSD POSITION

The user can specify the position of the on-screen
menu indications.
1 (Top left of the screen)
9 (Bottom right of the screen)
8 (Right center of the screen)
7 (Top right of the screen)

OSD MEMORY

This lets you save the cursor position in on-screen
menus.
ON : The cursor position is saved.
OFF : The cursor position is not saved.
• Even when this is set to "ON", the
Note
cursor position is not saved if the main
power of the projector is turned off.
2 (Left center of the screen)
3 (Bottom left of the screen)
4 (Top center of the screen)
5 (Center of the screen)
6 (Bottom center of the screen)
33