Video Setting; Dvi Edid (Only When The Et-Md77Dv Input Module Is Installed); Automatic Adjustment - Panasonic PT-D7700U Operating Instructions Manual

Option settings

Video setting

This feature allows the user to select the signaling
system according to the connected device.
Select "VIDEO SETTING" from the
"OPTION" screen and press the ENTER
button.
The "VIDEO SETTING" screen will be displayed.
Use the
"VIDEO" or "S-VIDEO".
Use the
1" or "AUTO 2".
"AUTO1": The system is automatically selected from
among NTSC, PAL, SECAM, NTSC4.43 and
PAL60.
"AUTO2": The system is automatically selected from
among NTSC, PAL-M and PAL-N.
DVI EDID
(Only when the ET-MD77DV input module is
installed)
Select the EDID mode setting that corresponds to
the device to be connected.
Select "DVI EDID" from the "OPTION"
screen and press the ENTER button.
Use the
"EDID1" or "EDID2".
MODE Input signal formats supported
480p, 576p, 720/60p, 720/59.94p, 720/50p,
1 080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF,
EDID1
1 080/23.98sF, 1 080/30p, 1 080/29.97p,
1 080/25p, 1 080/24p, 1080/23.98p
Displayable resolution:
VGA-UXGA (non-interlace)
EDID2
Dot clock frequency:
25 MHz - 162 MHz
Note
• Interlace signals are not supported even
when the EDID2 mode is selected.
72
buttons to select
buttons to select "AUTO
buttons to select

Automatic adjustment

(Only for RGB input)
Use this setting when adjusting a specific or oblong
(16:9, etc.) signal.
Press the MENU button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press the ENTER button.
The OPTION screen will be displayed.
Using the
SETUP".
Press the ENTER button.
The AUTO SETUP screen will be displayed.
Using the
desired mode.
"DEFAULT": to receive signals of which image
aspect is 4:3 or 5:4
"WIDE": to receive signals of which image
aspect is 16:9 (oblong)
"USER": to receive signals of specific horizontal
resolution (number of horizontally
displayed dots)
MODE Applicable resolution
640 x 400, 640 x 480, 800 x 600, 832 x
624, 960 x 720, 1 024 x 768, 1 152 x 864,
DEFAULT
1 152 x 870, 1 280 x 960, 1 280 x 1 024,
1 600 x 1 200, 1 400 x 1 050
720 x 400, 848 x 480, 1 280 x 720,
WIDE
1 120 x 750, 1 376 x 768, 1 600 x 1 024
If "USER" is selected, enter the
horizontal resolution of signal source
into "DISPLAY DOTS" using
buttons.
Press the ENTER button.
Execute automatic adjustment.
A message "PROGRESS..." appears during
automatic adjustment.
When the adjustment is complete, the system
returns to the input screen.
buttons, select "AUTO
buttons, switch to the