Option1 Settings; Color Correction; Contrast Mode; Auto Signal - Panasonic PT-D4000U Operating Instructions Manual

OPTION1 settings

OPTION1

COLOR CORRECTION

CONTRAST MODE

AUTO SIGNAL

BACK COLOR

STARTUP LOGO

SUB MEMORY LIST

DVI EDID
DVI SIGNAL LEVEL
FUNC1
OSD POSITION
OSD MEMORY
MENU SELECT
CHANGE
COLOR CORRECTION
OFF : This is the standard setting.
USER : The six colors of red, green, blue, cyan,
magenta and yellow can be adjusted
and registered for each of four signal
systems: Video, S-Video, RGB and
YP P
B R
Press the ENTER button to make the
detailed settings.
COLOR CORRECTION
R
G
B
Cy
Mg
Ye
MENU SELECT
ADJUST
The current signal system is displayed.
CONTRAST MODE
There are two modes for adjusting to the operating
environment.
NORMAL : The brightness is set to maximum.
HIGH : The contrast is set to maximum.
AUTO SIGNAL
The position where the screen is displayed can be
adjusted automatically without pressing the AUTO
SETUP button on the remote control each time
signals are input when signals are input frequently
such as when the projector is used at a conference.
ON : Auto setup is performed automatically
when the video signals of the images
being projected have changed.
OFF : The input auto setup function is set to
OFF.
32
USER
NORMAL
OFF
BLUE
OFF
EDID2:PC
0-255:PC
1
ON
.
RGB
0
0
0
0
0
0
BACK COLOR
You can set the colors of the screen when no signal
is input to the projector.
BLUE : Set screen color to blue.
BLACK : Set screen color to black.
LOGO1 : The picture registered by the user will
be projected.
LOGO2 : The Panasonic logo is projected.
STARTUP LOGO
This sets the startup logo that is projected when the
power is turned on.
LOGO2 : This is the standard setting. The
Panasonic logo is projected.
NONE : "STARTUP LOGO" is disabled.
LOGO1 : The picture registered by the user will
be projected.
• Separate software is required in order
Note
to create the pictures to use for
"LOGO1". Consult your dealer.
SUB MEMORY LIST
Multiple sets of image adjustment data (PICTURE,
POSITION, ADVANCED MENU adjustment values)
for the same kind of signal can be registered.
SUB MEMORY LIST
- : RGB1-XGA60
1: RGB1-XGA60
2: VIDEO-NTSC
3:
4:
5:
6:
7:
8:
SELECT
Registering in sub memory
Select the sub memory number to be registered
using the buttons.
Press the ENTER button.
• Sub memories range from 1 to 8.
Note
How to select sub memory
Select sub memory number (1 to 8) using the
buttons. Select "–" if you do not wish to
use the sub memory.
Press the ENTER button.
• You cannot select sub memory of a
Note
different signal system.
How to erase sub memory
Select sub memory number (1 to 8) corresponding
to sub memory to be erased using
Press the DEFAULT button.
Read the confirmation message and select.
STORE
RETURN
buttons.