Option1 Settings; Color Correction; Contrast Mode; Auto Signal - Panasonic DLP PT-D3500U Operating Instructions Manual

OPTION1 settings

OPTION1

COLOR CORRECTION

CONTRAST MODE

AUTO SIGNAL

BACK COLOR

SUB MEMORY LIST

DVI EDID

SELECT ENTER
COLOR CORRECTION
OFF : Standard setting
USER : The six colors of red, green, blue, cyan,
magenta and yellow can be adjusted
and registered for each of four signal
systems: Video, S-Video, RGB and
YP P
B R
Press the "ENTER" button to make the
detailed settings.
COLOR CORRECTION
R
G
B
Cy
Mg
Ye
SELECT ADJ
CONTRAST MODE
There are two modes for adjusting to the operating
environment.
NORMAL : The contrast is set to normal and the
brightness to maximum.
HIGH : The contrast is set to maximum and
the brightness to normal.
AUTO SIGNAL
The position where the screen is displayed can be
adjusted automatically without pressing the AUTO
SETUP button on the remote control each time
signals are input when signals are input frequently
such as when the projector is used at a conference.
ON : Auto setup is performed automatically
when the video signals of the images
being projected have changed.
OFF : The input auto setup function is set to
OFF.
BACK COLOR
You can set the colors of the screen when no signal
is input to the projector.
BLUE: Set screen color to blue.
BLACK: Set screen color to black.
34
OFF
BLACK
EDID2:PC
RETRN
.
The current signal
RGB
0
system is displayed.
0
0
0
0
0
RETRN
SUB MEMORY LIST
Multiple sets of image adjustment data (PICTURE,
POSITION, ADVANCED MENU adjustment values)
for the same kind of signal can be registered.
SUB MEMORY LIST
ー： RGBーXGA60
1：
2：
3：
4：
5：
6：
7：
8：
SELECT STORE
RETRN
Registering in sub memory
Select the sub memory number to be registered
using the button.
Press the ENTER button.
• Sub memories range from 1 to 8.
Note
How to select sub memory
Select sub memory number (1 to 8) using the
buttons. Select "–" if you do not wish to
use the sub memory.
Press the ENTER button.
• You cannot select sub memory of a
Note
different signal system.
How to erase sub memory
Select sub memory number (1 to 8) corresponding
to sub memory to be erased using
Press the STD button.
When the indicator of sub memory to be erased
flashes, press the ENTER button.
DVI EDID
Set EDID to match the device connected.
Mode
480p, 576p, 720/60p, 1080/60i,
EDID1
1080/50i
VGA480/60, SVGA/60, XGA/60,
EDID2:PC
XGA/70, XGA/85, SXGA/60
buttons.
Matching Signal