The function can be adjusted in three steps. New IP conversion circuit The PT-D4000U features a new IP conversion circuit that produces more detailed images than our previous models. 3D color management system...
Page 3
Multiple terminals The PT-D4000U has an array of terminals-two RGB inputs including a 5-BNC connector, serial in/out, one S-video inputs, two remote in, one remote out, DVI-D and control capability-to support a broad range of projection needs HDCP. (High-Bandwidth Digital Content Protection) compliant. Using the serial terminal(RS232C),it is also possible to connect and operate AMX and Crestron control systems with ease.
2. Make sure there is an unobstructed space of 500 mm or more around the projector's exhaust openings. With ET-DLE300 With ET-DLE400 3. Do not stack projector units directly on top of one another. If two units must be stacked for backup use in 2.4-4.0:1 3.8-6.0:1 5.8-8.1:1...