Auto Setup; Dvi-D In; Sdi In; On-Screen Display - Panasonic PT-D5000ELS Functional Instructions

DISPLAY OPTION menu

AUTO SETUP

You can change the AUTO SETUP feature for specific signals.
Press I H to cycle through the options and press the ENTER
button to perform the AUTO SETUP.
For 4:3 or 5:4 signals
Applicable resolution: 640 x 400, 640 x480,
DEFAULT 800 x 600, 832 x 624, 960 x 720, 1 024 x 768,
1 152 x 864, 1 152 x 870, 1 280 x 960,
1 280 x 1 024, 1 600 x 1 200, 1 400 x 1 050
For wide signals
Applicable resolution: 720 x 400, 848 x 480,
WIDE
1 280 x 720, 1 024 x 600, 1 120 x 750,
1 440 x 900, 1 680 x 1 050
For specific resolution signals
USER Select the required MODE and change the
DISPLAY DOTS value by pressing I H.

DVI-D IN

NOTE:
• The DVI-D IN setting for the best quality depends on the
output equipment. Refer the instructions of the connected
equipment.
• DVI signal is very sensitive, and malfunction may occur or
other problems could be encountered with some DVI
equipment.

DVI EDID

You can switch the EDID setting and signal level for
variable DVI signals.
EDID3
EDID1
EDID2(PC)

DVI SIGNAL LEVEL

0-255:PC
16-235

SDI IN

(PT-DZ6710 only)
You can select signal amplitude type.
64-940
4-1019
NOTE:
• Available with YP P
B
• Usually 64-940 setting is recommended.
E
NGLISH - 26
Switch between fine settings for a
moving image and for a still image.
Fine setting for mainly a moving
image, such as signals from a DVD
player.
Fine setting for mainly a still image,
such as computer.
(PC scale) For connecting to a
computer via DVI-D IN terminal
(TV scale) For connecting to AV
equipment via DVI-D IN terminal, such
as a DVI - HDMI conversion cable
connection
Normal setting
For when grey colour is too close to
black
or RGB of HD-SDI signal.
R

ON-SCREEN DISPLAY

OSD POSITION

You can change the displaying position of the main
menu. Press I H to cycle through the options.
1
Upper left Upper centre
2
Left Centre
3
Lower left Lower centre

OSD DESIGN

You can change the background colour of the menu.
Press I H to select the required option.
1 Yellow
2 Blue
3 White

OSD MEMORY

The current menu cursor position will be retained
temporarily unless the projector switched off.
ON Memorise the menu cursor position.
OFF Reset the cursor position.

INPUT GUIDE

The name of current selected input terminal will be
displayed where the position that is selected in OSD
POSITION.
Displays the current selected input
ON
terminal.
OFF Deactive
WARNING MESSAGE
You can prevent the display of waning messages.
All of the warning messages will be
ON
displayed.
None of the warning messages will be
OFF
displayed.
NOTE:
• When the WARNING MESSAGE is set to OFF, use the
projector with utmost care due to none of the warning
messages will be displayed.
4 7
Upper right
5 8
Right
6 9
Lower right
4 Green
5 Pink
6 Brown