Outside Line Buttons; Floating Buttons; To Switch From Handset To Handsfree - Telrad Avanti 3025 User Manual

•
flashing mode - the DN button flashes green when a call
is received, but there is no ringing.
•
delayed ringing mode - a call rings first at another set or
group of sets, for a programmed length of time, before
beginning to ring at your set.

OUTSIDE LINE BUTTONS

One or more of the buttons on your telephone may be
associated with either specific lines or outside line groups.
To access a line for dialing outside the system, press an
outside line button.

FLOATING BUTTONS

Calls on outside lines for which no button has been defined,
may be associated with a button just for the duration of the
call. These buttons are called "floating" buttons.
NOTE Some of the function codes in your system may
be different from those indicated here. If so, see
your System Administrator for the correct codes.
TO SWITCH FROM HANDSET TO
HANDSFREE
During a call conducted via the handset:
1. Press [SPKR].
2. Replace the handset and talk via the telephone set
microphone.
10 Avanti 3025 set