Automatic Redial; Waiting For An Available Outside Line - Telrad Speakerphone set User Manual

To dial the number saved
1. Access an outside line.
2. Press [FEAT].
3. Dial the SAVE/REPEAT access code.

AUTOMATIC REDIAL

If you dial an outside number and hear busy tone, you can
have the system dial the number several times, at pre-
defined intervals.
When you hear busy tone:
Press an ARD button.
•
When the outside party answers:
• Press [SPKR] or lift the handset.
If the dialed number rings, or if the system makes the
maximum number of dialing attempts, the Automatic
redial is deactivated.
• To temporarily deactivate
or reactivate Automatic Redial
• Press the ARD button again.
Several Automatic redials may be activated simul-
taneously by using more than one ARD button.

WAITING FOR AN AVAILABLE OUTSIDE LINE

(TRUNK QUEUE)
When you try to select an outside line and hear busy tone:
1. Press [FEAT].
2. Dial the CALLBACK/QUEUE access code ([2][2]).
When an outside line becomes available, the system rings
your extension. Then:
3. Press [SPKR] or lift the handset.
4. Listen for outside dial tone and dial the desired number.
14 Speakerphone set and Display Speakerphone set
NOTE