Table of Contents
Advertisement
Charging Battery
Battery must be inserted to handset.
. Use specified AC Charger ZTDAA1 (sold
separately) only. In this guide, ZTDAA1 is
referred to as "AC Charger."
. Handset and AC Charger may warm during
charging.
AC 100V Outlet
Blades
AC Charger
Small Light
Release
Tabs
External
Device Port
Port Cover
Charger Connector
Arrows
Important AC Charger Usage Notes
. Fold back blades after charging.
. Do not pull, bend or twist the cord.
Advanced
1
ODisabling USB Charge (P.13-17)
1
Open Port Cover as shown
2
Connect AC Charger
. With arrows up, insert connector until
it clicks.
3
Extend blades
4
Plug AC Charger into AC
outlet
. Small Light illuminates red while
charging.
. When charging completes Small
Light goes out.
5
Unplug AC Charger
. Pull AC Charger straight out.
6
Disconnect handset
. Squeeze release tabs to remove
connector.
7
Fold back blades and
replace Port Cover
When Small Light Flashes
. Battery is not charging due to defect or
terminal exhaustion; replace it with a new
one.
USB Charge
. Connect handset (with power on) to PC
via USB Cable to charge battery.
Charging Battery Overseas
. SoftBank is not liable for problems
resulting from charging battery abroad.
7
1-
Advertisement
Chapters
Table of Contents
