Connecting To Pc; Mass Storage - SoftBank 920SH Instruction

Connecting to PC

Accessing Memory Card from PC
Connect handset to a PC via USB Cable
to access Memory Card from the PC
without removing the card from handset.
If handset is connected to a PC via USB
Cable, disconnect it first.
1
% S g Settings S %
S f Connectivity
S e USB Mode S %
2
e Mass Storage S %
A

Mass Storage

Calling not
available during
operation, OK?
Yes
No
3
e Yes S %
10
12-
4
5
G 10
Connect handset to a PC via
USB Cable
A S e Yes S %
S Connection ends
. Safely remove handset (recognized
as removable hardware device) on
the PC, then disconnect USB Cable.
Utility Software (Japanese)
Supplied CD-ROM contains these utility
software programs:
Modem
Use handset as a modem
Wizard
Handset Transfer files between
Manager handset and PC
Transfer files on Memory
Memory Card Cards formatted for other
Transfer SoftBank handsets by
Software SHARP to Memory Cards
for handset
PC Document
Convert PC files to
Conversion
view them on handset
Utility
. USB Cable driver is also contained.
. For details, see Utility Software Starter
Guide (Japanese) on Utility Software
CD-ROM.
Mobile Data Communication Fees
. Using the Internet by connecting handset
to PC/PDA may incur high charges as
large-volume packet transmissions tend
to occur in a short period of time; check
transmission fees while online.