Table of Contents
Advertisement
1
Charging Battery
Use Desktop Holder with AC Charger (sold separately) to
charge battery.
Use only specified AC Charger.
Charging time: ZP.19-25
AC Outlet
2
4
Charger Connector
AC Charger
Release Tabs
(Arrows down)
Connection Port
1-14
Charger
Blades
3
1
Charging Indicator
(Bottom side)
1
Connect AC Charger to Desktop Holder
Insert Charger Connector (arrows down) into Connection Port.
2
Extend Charger Blades, and plug AC Charger
into AC Outlet
3
Align External Port with Stopper, and push
handset in the direction of arrow until it clicks
Charging Indicator illuminates and charging starts.
When charging is complete, Charging Indicator goes out.
When Charging Indicator flashes, remove handset from Desktop
External
Holder and battery from handset then attach them again.
Port
Charge Sound is heard when charging starts/ends.
When handset is turned off or in Manner Mode, nothing sounds.
4
When charging is complete, remove handset
from Desktop Holder and unplug AC Charger
from AC Outlet
Fold back Charger Blades after unplugging AC Charger.
Stopper
Squeeze Release Tabs and pull straight out to remove Charger
Connector.
Advertisement
Table of Contents
