Trace Key; Thread Color/Jog Key - Janome Memory Craft 500E Instruction Book

w
e

Trace key

You can check the size of the embroidery area by tracing
the pattern outline without stitching or with basting
stitches.
Press the trace key and the trace option window will
open.
q Trace key
q
The following 3 options are available:
1. Trace without stitching
Press the
window.
Press the trace key
the
2. Trace and baste (single)
Press the
window.
Lower the presser foot.
Press the start/stop button to start tracing with basting
stitches.
3. Trace and baste (double)
Press the
window.
Lower the presser foot.
Press the start/stop button to start tracing with basting
stitches. First, the machine bastes inside the pattern then
traces the pattern outline with basting stitches.
NOTE:
The machine will baste around the embroidery area
with a 5 mm allowance.
However, the allowance will be null if the pattern
spreads over the maximum limit of embroidery area.
To close the tracing option window, press the X key.

Thread color/Jog key

Press the thread color/jog key to show or hide the jog
keys. The thread color list of the selected design is
displayed when the jog keys are hidden.
Adjust the hoop position with the jog keys so that the
needle position comes right above the center of the
reference lines on the fabric.
w Thread color/Jog key
e Thread color list
r Jog keys
r
28
key to open the trace without stitching
to start tracing or press one of
keys to move the hoop to a corner.
key to open the trace and baste (single)
key to open the trace and baste (double)