Table of Contents
Advertisement
r
e
w
r
r
w
r
w
q
q
t
q
t
q
t
LCD Display
NOTE:
Magnetic or electrostatic interference may cause the
LCD display to flicker.
Do not use the machine near appliances that generate
a magnetic field or an electrostatic field such as
microwave ovens.
The LCD display shows following information when the
machine is turned on.
q Stitch pattern number
Function Keys
Mode key
When the power switch is turned on, the pattern selection
mode is set automatically.
Each time you press the mode key w, the green light
r will shift and the mode e will change in the following
order:
(1)
Pattern selection mode
t
(2)
Stitch width adjustment mode
(3)
Stitch length adjustment mode
w Mode key
e Mode
r Green light
Value set key
Press the value set keys t to alter the value.
Press " " to increase the value.
Press " " to decrease the value.
t Value set key
Selecting Stitch Patterns
(1) Pattern selection mode
The green light r is lit at the pattern selection mode.
The stitch pattern number will increase or decrease by 1
each time you press the value set keys t.
To select the desired stitch pattern, press the value
set key until the pattern number of the desired stitch is
indicated on the LCD display q.
To refer available stitch patterns for this sewing machine,
check the stitch chart in this manual on page 48.
(2) Stitch width adjustment mode
Press the mode key once w.
The green light r is lit at the stitch width adjustment
mode. The LCD display q shows the stitch width or
needle drop position, depending on the selected stitch
pattern.
Press the value set key t (
width or needle drop position.
Refer to pages 23 and 26.
(3) Stitch length adjustment mode
Press the mode key twice w.
The green light r is lit at the stitch length adjustment
mode. The LCD display q shows the stitch length.
Press the value set key t (
length.
Refer to pages 23 and 26.
Press the mode key w to return to the pattern selection
mode.
9
or
) to change the stitch
or
) to change stitch
Advertisement
Table of Contents
