Aastra 620d User Manual page 46

Supplementary features
You can activate a call routing for all phones. If you have not configured a call routing, the fac-
tory setting (all phones are ringing) is used as standard.
This function can also be stored under a configurable key (see Chapter
Settings
General
Pers. call routing
<Setting value>
■ Activating Ring alone
You want to specify which of your phones shall acoustically ring when you receive a call.
If your system administrator has set up a phone number with several phones for you, you can
specify which of your phones shall acoustically signal a call by using Ring alone
When you have activated Ring alone on a phone, the acoustic ringing tone is deactivated for all
other phones ( ). An incoming call is signalled in the display of all phones. You can answer the
call on each of your phones.
Note:
When you have activated Ring alone but deactivated the personal call routing for a phone in parallel, an
incoming call is not acoustically but only visually signalled.
This function must be stored under a configurable key (see Chapter
46
Activating personal call routing:
Press the navigation key to the right or the
Scroll to Settings and press the
Scroll to General and press the
Scroll to Personal call routing
Select the call routing you want and confirm with the
➔
Personal call routing is activated.
Deactivating personal call routing:
Press Menu > Activated features
Renaming personal call routing:
Press Menu > Settings >
In idle state:
Press the function key for
➔
Ring alone is activated/deactivated.
Menu
Select softkey.
Select softkey.
and press the Select
> Reset.
General > Personal call routing
<Ring alone>.
"Configuring keys", page 68).
softkey.
softkey.
Select softkey.
> Modify.
[a]
.
"Configuring keys", page 68).
Aastra 620d