Aastra 620d User Manual page 33

■ Receiving an Announcement
Your phone rings once and then automatically initiates the announcement. The display shows
). You will directly be addressed via your loudspeaker.
You can listen to the announcement or stop it.
■ Private call with PIN
You want to make a private call on your phone or on a third-party phone.
With the aid of your PIN you can use any phone to make an external call with your own personal
settings, even if that phone is locked for external calls. The called party's display shows your
personal phone number and not the number of the phone from which you are making your
call. Any call charges incurred will be charged to you.
The call number dialled is not stored in the last-number redial list.
<Setting value>
Aastra 620d
To continue the announcement as a phone call:
Press the Call key.
➔
You are now connected to the person who initiated the announcement.
To stop the announcement:
Press the End key.
1. Enter the */# procedure #46 followed by your internal call number.
2. Enter your PIN.
3. Enter the external call number directly, without the exchange access digit.
Press the Call key.
➔
The phone is now enabled. The external user is called.
Note:
The factory setting "0000" is not accepted. First change the PIN as described in
chapter "Changing the User
"User's Guide */# Procedures"). If you have forgotten your PIN, your system
administrator can reset it to the factory setting.
Supplementary features
PIN", page 60 or use the */# procedure *47 (see
33