Preset Memory - Yamaha YSP-40D Owner's Manual

DAB (Digital Audio Broadcasting)

PRESET MEMORY

The PRESET MEMORY mode is used to assign up to 99
preset numbers to DAB services.
1
Tune into the DAB service you would like to
assign a preset number to.
2
Press MEMORY.
The MEMORY indicator flashes for about ten
seconds.
MEMORY
y
There are two ways to select a preset DAB service: either by
using / or the numeric buttons.
3a
Press / to browse through the
assigned preset DAB service numbers in the
registry list.
When not assigned, "EMPTY" appears next to the
number. Continue pressing the button until
"EMPTY" appears. You can also choose the assigned
preset number. In this case, the previous service is
replaced with the current service.
55 EMPTY
Appears on the front panel display
y
Press / to move to the top of the DAB service list.
50
En
MEMORY
Flashes
ENTER
3b
Use the numeric buttons to enter a preset
number.
For example, to assign "56" to the current DAB
service:
MY BEAM
5
MY SUR.
6
If the number entered already exists (i.e. already
assigned to a service), then the previous service is
replaced with the current service.
4
Press MEMORY to assign the indicated
preset number to the current DAB service.
The MEMORY indicator turns off.
MEMORY
y
You can also press ENTER to assign the indicated preset
number.
PRESET 5_
PRESET 56