Connecting A Dvd Player/Recorder - Yamaha YSP-40D Owner's Manual

Connecting a DVD player/recorder

For audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL
DIGITAL IN jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog
audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO IN jacks on this unit in addition to
the coaxial digital audio connection.
For video connection, connect the video output jack of your DVD player/recorder to the DVD/AUX 2 VIDEO IN jack of
this unit. If your DVD player/recorder has component video output jacks, connect the component video output jacks of
your DVD player/recorder to the DVD/AUX 2 COMPONENT VIDEO IN jacks of this unit. Once the component video
connection is made, you can enjoy images with better resolution.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 18).
Notes
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see
page 25).
COMPONENT
STB
*1
You can only make
*1
either a composite
or a component
connection.
Video
output
Video signal to the TV
Video
Video pin cable
Component video pin cable
SUBWOOFER
COMPONENT
DVD/AUX 2 AUX 1
VIDEO IN
*2
For the DVD/
*1 *2
VCR combo
player/recorder
connection
Component Video
video output output
DVD player/recorder
Rear panel of this unit
TV/STB AUX 1
AUDIO IN
*2
R L
Analog
audio
output
Audio
Audio pin cable
Digital audio pin cable
Connections
DVD AUX 2
COAXIAL
OPTICAL
TV/STB AUX 1
DIGITAL IN
Coaxial
digital
output
21
En