Using Auto Setup (Intellibeam) - Yamaha YSP-40D Owner's Manual

AUTO SETUP (IntelliBeam)
Center line
Assembling the supplied cardboard
microphone stand
You will find three separate parts (one circular part and
two longitudinal parts) of the cardboard microphone stand
originally put together.
1
3
1
Disassemble the three parts of the cardboard
microphone stand originally put together.
2
Insert one of the longitudinal part into the
crevice of the other longitudinal part.
3
Place the circular part on top of the two
combined longitudinal parts.
4
Place the supplied IntelliBeam microphone
on top of the circular part.
36
En
IntelliBeam
microphone
2
4

Using AUTO SETUP (IntelliBeam)

Once the IntelliBeam microphone is firmly connected to
this unit and properly placed in your listening room,
follow the procedure below to start the AUTO SETUP
procedure.
You can also enter the AUTO SETUP procedure simply by
pressing and holding AUTO SETUP for more than two
seconds. In this case, this unit performs both of the beam
optimization and sound optimization procedures.
+
INPUT VOLUME STANDBY/ON
STANDBY/ON
DVD
STB
SEARCH
DAB
VOL MODE
5BEAM
1
STEREO
4
MUSIC
7
OFF
0
ENHANCER
DISPLAY
VOLUME
POWER POWER
AV TV
DOCK
AUX1 AUX2 AUX3
TV
INPUT1 MACRO
TV
MEMORY
AUTO
SETUP INPUTMODE SLEEP
ST+3BEAM 3BEAM
2 3
MY BEAM MY SUR.
5 6
MOVIE SPORTS
8 9
SUR. DECODE
+10
ENTRY MENU
TV/AV
ENTER
YSP
RETURN
CH TV VOL