LISTENING
TO
FM BROADCASTS
Using station preset feature
• Automatic station preset
You can store up to 40 FM stations (A I to E8: 8 preset numbers in each of the 5 preset groups).
1
Press
FM
to set the input to FM.
"FM" appears in the front panel display.
2
Press and hold
MEMORY
for more than 3
seconds.
The preset group and number as well as the MEMORY and
AUTO indicators flash. After approximately 5 seconds,
automatic presetting starts from the current frequency and
proceeds through higher frequencies.
Press MEMORY again to cancel while the MEMORY
indicator is flashing.
Flash
1
,,: .. 1
~
.
~.
:
....
~
....
t
Flashes
When automatic preset tuning is completed, the front panel
display shows the frequency of the last preset station.
,I,
~Ijl~
Press A
~
E or A
~
E to select a preset group, and then press +/- repeatedly to select a preset number to which the first station will be
stored after you perform step 2.
Notes
• Any stored station data existing under a preset number is cleared when you store a new station under the same preset number.
• If the number of received stations does not reach 40 (A 1 to E8), automatic preset tuning automatically stops after searching for all the
available stations.
If the desired station is not stored, or a station is not stored to the desired preset group and number, preset the station
manually. Refer to "Manual station preset" on page 25 for details.
24
En