Installing a Child Restraint System
8.
Push and pull the child restraint
system forward and from side-to-
side to verify that it is secure
enough to stay upright during
normal driving manoeuvres. If the
child restraint system is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.
56
Driver and Passenger Safety
To deactivate the lockable retractor
and remove a child restraint system,
unlatch the buckle, unroute the seat
belt, and let the belt fully retract.
LOCKING CLIP
Except for European models
On vehicles without lockable retractor
fitted to the seat where the child is
positioned
When you secure a child restraint
system with a lap/shoulder belt, be
sure you install a locking clip on the
seat belt.