Honda 2007 Civic Hatchback Owner's Manual page 407

Lights
Replacing a Glove Box Light Bulb
1. Open the glove box. Place a cloth
and pry the plastic lens carefully
with a small flat-tipped
screwdriver.
2. Remove the light assembly by
pulling it down.
404
Maintenance
BULB CONNECTOR
3. Pull the bulb straight out of its
holder. Install the new bulb
straight into the holder until it
bottoms.
4. Turn on the position lights to
make sure the new bulb is
working.
5. Put the light assembly back in
place, then close the glove box.