Multi-Information Display
Outside Temperature Display
Adjustment
If you find that the temperature
reading is always a few degrees
below or above the actual
temperature, adjust it as described
on the following columns.
120
Instruments and Controls
While the multi-information display
is showing ''ADJUST OUTSIDE
TEMP. DISPLAY,'' press the SEL/
RESET button. The display changes
to the setting display.
The highlighted number is the
current adjustment above or below
the outside temperature. Select
either
+
or
−
icon by pressing the
INFO button repeatedly then press
the SEL/RESET button to change
the setting value. You can select the
value between 0,
+ + +
1,
− − −
1,
2,
3. To enter your selection,
select the SET icon by pressing the
INFO button, then press the SEL/
RESET button.
2,
3, and 0,