Honda 2007 Civic Hatchback Owner's Manual page 58

6. After confirming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child restraint system will not
be secure.
To remove slack, it may help to
put weight on the child restraint
system, or push on the back of the
restraint system while pulling up
on the belt.
Installing a Child Restraint System
7. Secure the belt in the slit by
pushing up the tab. Make sure the
belt is not twisted and it is
positioned properly in the slit.
Driver and Passenger Safety
CONTINUED
55