Brake System Indicator - Honda 2007 Civic Hatchback Owner's Manual

Brake System Indicator

The brake system indicator
normally comes on when
you turn the ignition switch to the
ON (II) position, and as a reminder
to check the parking brake. It will
stay on if you do not fully release the
parking brake.
If the brake system indicator comes
on while driving, the brake fluid level
is probably low. Press lightly on the
brake pedal to see if it feels normal.
If it does, check the brake fluid level
the next time you stop at a service
station (see page 378 ).
If the fluid level is low, take your
vehicle to a dealer, and have the
brake system inspected for leaks or
worn brake pads.
You will also see the symbol ''
or this symbol with a ''BRAKE
FLUID LOW'' message on the multi-
information display.
470
Taking Care of the Unexpected
However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system's dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down, and
you will have to press harder on the
pedal.
Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see
Towing on page 479
You will also see the symbol ''
,'' or this symbol with a ''CHECK
SYSTEM'' message in the multi-
information display if there is a
problem with the brake system.
If you must drive the vehicle a short
distance in this condition, drive
slowly and carefully.
If the ABS indicator comes on with
the brake system indicator, have
your vehicle inspected by your
dealer immediately.
Emergency
).
,''