Honda 2007 Civic Hatchback Owner's Manual page 400

BOLTS
2. Use a wrench to remove the two
mounting bolts.
3. Pull the light assembly out of the
rear pillar.
4. Determine which of the two bulbs
is burned out: stop/tail-light or
turn signal light.
5. Remove the socket for that bulb
by turning it one-quarter turn
anticlockwise.
6. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
7. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
8. Turn on the lights to make sure
the new bulb is working.
9. Reinstall the light assembly into
place, then tighten the mounting
bolts securely.
10. Align the tabs on the cover with
the holes in the body. Slide the
cover on to the rear pillar and
reinstall it security.
Maintenance
Lights
397