Table of Contents
Advertisement
4-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the engine switch off.
The fuses are located in the following places. To check the
fuses, follow the instructions below.
Engine compartment
Under the instrument panel
After a system failure, see "Fuse layout and amperage rat-
ings" (P. 438) for details about which fuse to check.
Push the tab in and lift the lid
off.
Remove the lid.
4
435
Advertisement
Table of Contents
