Table of Contents
Advertisement
1-2. Opening, closing and locking the doors
■
Setting and canceling the functions
Vehicles with multi-information display
P. 181
Vehicles without multi-information display
To switch between setting and canceling, follow the procedure
below:
Close all the doors and turn the engine switch to the ON posi-
tion. (Perform step 2 within 20 seconds.)
Function
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
38
Shift the shift lever to P or N,
press and hold the driver's door
lock switch (
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions
corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Shift lever position
P
N
or
) for
to
the
Driver's door lock
switch position
Advertisement
Table of Contents
