Toyota 2016 Sequoia Manual page 373

Hide thumbs Also See for 2016 Sequoia:

Table of Contents

Test the operation of the HomeLink

programmed button. Check to see if the gate/device operates

Repeat the steps above to program another device for each of

the remaining HomeLink

Programming other devices

To program other devices such as home security systems, home

door locks or lighting, contact your authorized Toyota dealer for

Reprogramming a button

The individual HomeLink

reprogrammed. To reprogram a button, follow the programming

instructions.

Operating the HomeLink

Press the appropriate HomeLink

on the HomeLink

The HomeLink

as long as the button is pressed.

Reprogramming a HomeLink

Press and hold the desired HomeLink

indicator light will start flashing slowly. Keep pressing the

button and then follow the "Programming the HomeLink

(for U.S.A. owners)" instructions. (P. 370)

buttons cannot be erased but can be

transceiver should turn on.

continues to send a signal for a maximum of 20 seconds

3-5. Using the other interior features

by pressing the newly

button. The HomeLink

button. After 20 seconds, the