Toyota 2016 Sequoia Manual page 250

Hide thumbs Also See for 2016 Sequoia:
Table of Contents

Advertisement

2-4. Using other driving systems
To disable A-TRAC (4L mode on 4WD models)
If the vehicle gets stuck in fresh snow or mud, A-TRAC may reduce
power from the engine to the wheels. You may need to turn the sys-
tem off to enable you to rock the vehicle in order to free it.
Automatic reactivation of TRAC, A-TRAC, VSC and Trailer Sway Con-
trol
Turning the engine switch off after turning off the TRAC, A-TRAC, VSC and
Trailer Sway Control systems will automatically re-enable them.
Automatic A-TRAC reactivation (A-TRAC OFF mode)
With A-TRAC OFF mode, TRAC OFF indicator turn on. The A-TRAC system
will turn on when the vehicle speed increases.
When the TRAC OFF indicator comes on even if the VSC OFF switch
has not been pressed
TRAC cannot be operated. Contact your Toyota dealer.
Sounds and vibrations caused by the ABS, TRAC, A-TRAC, VSC,
Trailer Sway Control and brake assist system
A sound may be heard from the engine compartment when the engine is
started and just after the vehicle begins to move. This sound does not
indicate that a malfunction has occurred in any of these systems.
Any of the following conditions may occur when the above systems are
operating. None of these indicates that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly after the ABS is activated.
• The brake pedal may move down slightly after the ABS is activated.
250
Stop the vehicle completely, and
press the VSC OFF switch for
more than 3 seconds.
The TRAC OFF indicator will
come on.
The system is in all off mode.
Push the switch again to turn the
system back on.

Advertisement

Table of Contents
loading

Table of Contents