Table of Contents
Advertisement
4-3. Do-it-yourself maintenance
Wait for several minutes with the engine switch on, and then
turn the engine switch to the ACC or LOCK position.
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code of tire pressure
warning valve and transmitter. Have the ID code registered by your
Toyota dealer.
■
When to replace your vehicle's tires
Tires should by replaced if:
●
The treadwear indicators are showing on a tire.
●
You have tire damage such as cuts, splits, cracks deep enough to
expose the fabric or bulges indicating internal damage
●
A tire goes flat repeatedly or cannot be properly repaired due to the
size or location of a cut or other damage
If you are not sure, consult with your Toyota dealer.
418
Push and hold the tire pressure
warning reset switch until the tire
pressure warning light blinks
slowly 3 times.
Advertisement
Table of Contents
