Replacing The Auxiliary Light Bulb (Xvs1100Az) - Yamaha 2010 XVS1100Z Owner's Manual

XVS1100AZ
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the auxiliary light
bulb (XVS1100AZ)
If the auxiliary light bulb burns out, re-
place it as follows.
1. Remove the headlight unit by re-
moving the screws.
1. Screw
2. Remove the socket (together with
the bulb) by pushing it in and turn-
ing it counterclockwise.
7-32
EAU33413
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by pushing it in and turning it
clockwise until it stops.
6. Install the headlight unit by install-
ing the screws.
7