Indicator And Warning Lights - Yamaha 2010 XVS1100Z Owner's Manual

The steering must be locked before the
key can be turned to " ".
NOTICE
Do not use the parking position for
an extended length of time, other-
wise the battery may discharge.
INSTRUMENT AND CONTROL FUNCTIONS

Indicator and warning lights

ECA11020
1. Oil level warning light "
2. Neutral indicator light "
3. Turn signal indicator light "
4. Engine trouble warning light "
5. Immobilizer system indicator light
(XVS1100AZ)
6. High beam indicator light "
Turn signal indicator light "
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
EAU11004
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Oil level warning light "
This warning light comes on if the en-
gine oil level is low.
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
"
" on for a few seconds, and then go off.
"
If the warning light does not come on
"
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
"
circuit.
EAU11020
TIP
"
Even if the oil level is sufficient, the
warning light may flicker when riding on
a slope or during sudden acceleration
or deceleration, but this is not a mal-
function.
EAU11060
"
4-4
EAU11080
"
EAU11123
"
4