Seats (Xvs1100Az) - Yamaha 2010 XVS1100Z Owner's Manual

2. Install the passenger seat holder
and bolts.
3. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
INSTRUMENT AND CONTROL FUNCTIONS

Seats (XVS1100AZ)

Passenger seat
To remove the passenger seat
Remove the nut and washer, and then
pull the passenger seat up.
1. Nut
2. Washer
To install the passenger seat
1. Insert the projection on the front of
the passenger seat into the holder
as shown and place the seat in the
original position.
2. Install the washer and nut, and
then tighten the nut to the specified
torque.
4-14
EAU14201
Tightening torque:
Passenger seat nut:
13 Nm (1.3 m·kgf, 9.4 ft·lbf)
1. Projection
2. Seat holder
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolt, and then pull the
rider seat up.
4