Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb - Yamaha 2010 XVS1100Z Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit by re-
moving the screws.
7
1. Screw
2. Disconnect the headlight coupler,
and then remove the bulb cover.
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
7-31
Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
screws.
1. Screw
XVS1100Z
1. Screw
EAU24283