2. Pull out the seat leg from the back
of the seat cushion and lock it on
the anchor. Reinstall the cover.
'06 4Runner_U (L/O 0508)
3. Raise the seatback while pushing
down the seatback angle adjusting
lever.
CAUTION
When removing or
reinstalling the
seat, observe the following to prevent
personal injury:
D
Do not fold or remove the seat
while the vehicle is moving.
D
Be careful not to get your hands or
feet pinched in the seat.
D
Be careful not to hit the removed
seat against a person or drop it on
yourself.
D
When reinstalling the seat, be care-
ful not to hit the seat against your-
self or the vehicle.
To prevent personal injury in a colli-
sion or sudden stop:
D
Do not sit on or place anything on
the folded seatback while driving.
D
Do not leave the removed seat un-
secured in the vehicle.
D
Do not try to sit on or place any-
thing on the removed seat.
D
Reinstall each seat in its original
position. Failure to do so will pre-
vent third seat occupants from us-
ing seat belts properly.
D
Make
sure
the seat
is securely
locked by pushing forward and rear-
ward on the top of the seatback or
by trying to pull up the edge of the
bottom cushion. Failure to do so
will prevent the seat belt from oper-
ating properly.
D
Make sure the seat belts are not
twisted or caught under the seat
and are arranged in their proper
position and are ready to use.
61