Toyota 2006 4runner Owner's Manual page 49

To make only slight changes to an already
memorized position, the easiest way is to
first activate the memorized position, then
make the desired changes and perform
step 2 above.
'06 4Runner_U (L/O 0508)
RECALLING THE MEMORIZED POSITION
When you push button "1" or "2", a
beep will sound and the driving posi-
tion will be automatically adjusted to
the position recorded for that button.
The memorized position can be recalled
under the following conditions:
D
The ignition key is in the "ON" position
and the selector lever is in the "P"
position.
D
The ignition key is turned
"LOCK" position or the key is not in
the ignition switch, and less than 30
seconds have passed since opening
the driver's door.
To stop the operation, push any driving
position memory button.
To reactivate the system, push the button
"1" or "2" again.
If the vehicle's battery is disconnected,
the memory will be erased and the posi-
tions will have to be set again.
CAUTION
D
Do not start the vehicle while the
adjustments are being made.
D
Take care not to select the wrong
button, or the seat could strike the
rear passenger or hit your body
against the steering wheel. If this
happens, you can stop the move-
ment by pressing another driving
position memory switch.
to the
49