Toyota 2006 4runner Owner's Manual page 309

Hide thumbs Also See for 2006 4runner:

Table of Contents

(a) Programming the HomeLink

The HomeLink

in your vehicle has 3

buttons and you can store one program

for each button.

To ensure correct programming into the

, install a new battery in the

hand−held transmitter prior to program-

The battery side of the hand−held trans-

mitter must be pointed away from the

during the programming pro-

For Canadian users, follow the procedure

in "Programming an entrance gate/pro-

gramming all devices in the Canadian

1. Decide which of 3 HomeLink

you want to program.

2. Place your hand−held garage transmit-

ter 25 to 75 mm (1 to 3 in.) away from

the surface of the HomeLink

Keep the indicator light on the HomeLink

in view while programming.

'06 4Runner_U (L/O 0508)

(1 to 3 in.)

3. Simultaneously

along with the selected HomeLink

Do not release the buttons until step 4

has been completed.

rapid flash after 20 seconds, you can

release both buttons.

changes from a slow to a

Chapters

Table of Contents